Product Details
This Whiteline Front Sway Bar Link (OEM Style) fits the 1998-2002 Subaru Legacy GT Limited (BE/BH). This part is for the front of the vehicle. Part number KLC30. Whiteline's note for this fit: Replaces OE Plastic Link: Heavy Duty Alloy Link, Complete Assembly. You receive 2 links, 4 bolts, 8 washers, and 4 nuts.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system.
Installation is rated easy, with about 1 hour of work listed. It does not require a wheel alignment. To go with it on the Legacy, see Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Finish: Powder coating covers the metal for protection against chips and rust.
- Install guide: Whiteline packs an install guide with it.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Bushing compound: Bushings made of a low-compliance elastomer cut flex and movement in the suspension.
Specifications
| Part Number | KLC30 |
| Part Name | Sway Bar Link |
| Vehicle | 1998-2002 Subaru Legacy GT Limited |
| Drivetrain | FWD/AWD |
| Chassis Code | BE/BH |
| Bushing Material | Polyurethane |
| Grade Type | Performance |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 4 Bolts, 8 Washers, 4 Nuts |
| Length | 65 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Replaces OE Plastic Link - Heavy Duty Alloy Link - Complete Assembly |




