Product Details
This Whiteline Front Sway Bar Link (OEM Style) fits the 1998-2002 Subaru Forester Base, L, S (SF/SG). Included: 2 links, 4 bolts, 8 washers, and 4 nuts. Whiteline's note for this fit: Replaces OE Plastic Link: Heavy Duty Alloy Link, Complete Assembly. Whiteline part number: KLC30. Position: front.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system.
Installation is rated easy, with about 1 hour of work listed. No alignment is needed afterward. Other Whiteline parts we list for the Forester: Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Construction: High-strength alloy gives the strength needed without much weight.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Install guide: Instructions for fitting are packed in the box.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
Specifications
| Part Number | KLC30 |
| Part Name | Sway Bar Link |
| Vehicle | 1998-2002 Subaru Forester Base, L, S |
| Chassis Code | SF/SG |
| Bushing Material | Polyurethane |
| Grade Type | Performance |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 4 Bolts, 8 Washers, 4 Nuts |
| Length | 65 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Replaces OE Plastic Link - Heavy Duty Alloy Link - Complete Assembly |




