Product Details
Whiteline built the Adjustable Front Sway Bar Link (Models w/ Pressed Steel Arms) for the 2006 Volkswagen Beetle TDI (A4). Whiteline's note for this fit: Suits Models with Pressed Steel Arm. Adjustable Extra Heavy Duty. In the box: 2 links. The part number is KLC150. Placement: front. The listing names the TDI trim.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. Other Whiteline parts we list for the Beetle: Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and Heavy Duty Blade Adjustable 24mm Rear Sway Bar.
Features
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Install guide: Written install instructions are included with the part.
- Construction: Alloy construction keeps the weight down while handling the loads.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
Specifications
| Part Number | KLC150 |
| Part Name | Sway Bar Link |
| Vehicle | 2006 Volkswagen Beetle TDI |
| Chassis Code | A4 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 110-135 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Suits Models with Pressed Steel Arm. Adjustable Extra Heavy Duty. Length 110-135mm. Bolt Diameter 10mm. |