Product Details
Made to fit the 2002-2004 Volkswagen Beetle Turbo S, the Adjustable Front Sway Bar Link (Models w/ Pressed Steel Arms) from Whiteline. Position: front. Chassis code: A4. The part number is KLC150. Trim named on the listing: Turbo S. Application note: Suits Models with Pressed Steel Arm. Adjustable Extra Heavy Duty. Included: 2 links.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Expect a moderate job of about 1 hour. No alignment is needed afterward. Other Whiteline parts we list for the Beetle: Front Control Arm Lower Inner Front Bushing, Heavy Duty Blade Adjustable 24mm Rear Sway Bar, and Heavy Duty 22mm Front Sway Bar.
Features
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
- Install guide: Instructions for fitting are packed in the box.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Construction: Made from strong, light alloy.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
Specifications
| Part Number | KLC150 |
| Part Name | Sway Bar Link |
| Vehicle | 2002-2004 Volkswagen Beetle Turbo S |
| Chassis Code | A4 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 110-135 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Suits Models with Pressed Steel Arm. Adjustable Extra Heavy Duty. Length 110-135mm. Bolt Diameter 10mm. |