Product Details
Fitted to the 2000-2005 Volkswagen Beetle GL, GLS: the Whiteline Adjustable Front Sway Bar Link (Models w/ Pressed Steel Arms). Placement: front. Whiteline's note for this fit: Suits Models with Pressed Steel Arm. Adjustable Extra Heavy Duty. Trims named on the listing: GL and GLS. The part number is KLC150. The chassis code on the listing is A4. The kit contains 2 links.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this front link is built to keep that connection firm. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. To go with it on the Beetle, see Front Control Arm Lower Inner Front Bushing, Heavy Duty Blade Adjustable 24mm Rear Sway Bar, and Heavy Duty 22mm Front Sway Bar.
Features
- Anodized alloy: The alloy carries an anodized finish for durability.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Hardware: The kit includes locking nuts and washers.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Install guide: Whiteline packs an install guide with it.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
Specifications
| Part Number | KLC150 |
| Part Name | Sway Bar Link |
| Vehicle | 2000-2005 Volkswagen Beetle GL, GLS |
| Chassis Code | A4 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 110-135 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Suits Models with Pressed Steel Arm. Adjustable Extra Heavy Duty. Length 110-135mm. Bolt Diameter 10mm. |



