Product Details
Whiteline Adjustable Front Sway Bar Link (Models w/ Pressed Steel Arms) is made for the 2000-2004 Volkswagen Beetle GLX. Application note: Suits Models with Pressed Steel Arm. Adjustable Extra Heavy Duty. It goes on the front of the vehicle. Part number KLC150. In the box: 2 links. It is listed for the A4 chassis. Trim named on the listing: GLX.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this front link is built to keep that connection firm. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. Other Whiteline parts we list for the Beetle: Front Control Arm Lower Inner Front Bushing, Heavy Duty Blade Adjustable 24mm Rear Sway Bar, and Heavy Duty 22mm Front Sway Bar.
Features
- Hardware: Hardware supplied: locking nuts and washers.
- Construction: Made from strong, light alloy.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Install guide: Whiteline packs an install guide with it.
Specifications
| Part Number | KLC150 |
| Part Name | Sway Bar Link |
| Vehicle | 2000-2004 Volkswagen Beetle GLX |
| Chassis Code | A4 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 110-135 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Suits Models with Pressed Steel Arm. Adjustable Extra Heavy Duty. Length 110-135mm. Bolt Diameter 10mm. |