Product Details
This Whiteline Front Sway Bar Link Kit fits the 2017-2025 Tesla Model 3. It goes on the front of the vehicle. Whiteline's note for this fit: Adjustable Extra Heavy Duty. The kit contains 2 links. Order it as part number KLC180-295.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this front link is built to keep that connection firm. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. Working on the same car? We also list Front and Rear Sway Bar Vehicle Kit, Adjustable Rear Upper Control Arm Set, and Rear Sway Bar Link for the Model 3.
Features
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Material: Made from aluminum alloy.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Install guide: Whiteline packs an install guide with it.
- Hardware: Hardware supplied: locking nuts and washers.
Specifications
| Part Number | KLC180-295 |
| Part Name | Sway Bar Links |
| Vehicle | 2017-2025 Tesla Model 3 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 290-315 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 290-315mm. Bolt Diameter 12mm. |
Fitment for Model 3 sway bar links
Fits the 2017-2025 Tesla Model 3. Each model year is listed below.

