Product Details
This Whiteline Front Sway Bar Link Kit fits the 1965-1970 Chevrolet Impala. Included: 8 bushings, 2 tubes, 2 bolts, 8 washers, 2 nuts, and grease. Position: front. Whiteline part number: W23836. It is listed for the B-Body chassis.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. Working on the same car? We also list Body Mount Bushing Kit and Engine Motor Mount Bushing for the Impala.
Features
- Easy to fit: Made with the installer in mind, so it goes in without special equipment.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Install guide: Instructions for fitting are packed in the box.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | W23836 |
| Part Name | Sway Bar Links |
| Vehicle | 1965-1970 Chevrolet Impala |
| Drivetrain | RWD |
| Chassis Code | B-Body |
| Bolt Thread Diameter | 10 mm |
| Bushing Material | Polyurethane |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 8 Bushings, 2 Tubes, 2 Bolts, 8 Washers, 2 Nuts, Grease |
| Length | 152 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | - |