Product Details
This Whiteline Front Sway Bar Link fits the 2026 Honda Prelude. The part number is KLC140-335. Position: front. The kit contains 2 links. It is listed for the PF chassis.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. Other Whiteline parts we list for the Prelude: Adjustable Rear Sway Bar Link and 2-Point Adjustable 22mm Rear Sway Bar.
Features
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Install guide: Written install instructions are included with the part.
- Hardware: Also in the box: locking nuts and washers.
- Construction: High-strength alloy gives the strength needed without much weight.
Specifications
| Part Number | KLC140-335 |
| Part Name | Sway Bar Link |
| Vehicle | 2026 Honda Prelude |
| Chassis Code | PF |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 330-355 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | - |
Fitment for Prelude sway bar links
Fits the 2026 Honda Prelude. Each model year is listed below.