Product Details
This Whiteline Front Sway Bar Link fits the 2007-2010 Pontiac G3. Part number KLC140-295. In the box: 2 links. Application note: Adjustable Extra Heavy Duty. It goes on the front of the vehicle.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. To go with it on the Pontiac G3, see 12mm Adjustable Front Camber Bolts, Front Control Arm Lower Inner Rear Bushing, and Rear Sway Bar Link.
Features
- Install guide: Written install instructions are included with the part.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Hardware: Supplied with locking nuts and washers.
- Construction: Made from strong, light alloy.
Specifications
| Part Number | KLC140-295 |
| Part Name | Sway Bar Link |
| Vehicle | 2007-2010 Pontiac G3 |
| Chassis Code | Gamma |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 290-315 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 290-315mm. Bolt Diameter 10mm. |
Fitment for G3 sway bar links
Fits the 2007-2010 Pontiac G3. Each model year is listed below.