Product Details
This Whiteline Front Sway Bar Link fits the 2001-2012 Ford Escape (CD2). Whiteline's note for this fit: Adjustable Extra Heavy Duty. Position: front. In the box: 2 links. The part number is KLC140-295.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. A wheel alignment is not required. To go with it on the Escape, see 12mm Adjustable Front Camber Bolts, Rear Sway Bar Link, and Front Sway Bar Mount Bushing.
Features
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Install guide: Whiteline packs an install guide with it.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Construction: Alloy construction keeps the weight down while handling the loads.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
Specifications
| Part Number | KLC140-295 |
| Part Name | Sway Bar Link |
| Vehicle | 2001-2012 Ford Escape |
| Chassis Code | CD2 |
| Drivetrain | AWD/FWD |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 290-315 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 290-315mm. Bolt Diameter 10mm. |
Fitment for Escape sway bar links
Fits the 2001-2012 Ford Escape (CD2). Each model year is listed below.

