Product Details
This Whiteline Front Sway Bar Link Bushing Kit fits the 1971-1985 Toyota Celica. Whiteline part number: W22121. Chassis code: A20/A40/A60. Whiteline's note for this fit: Suits RA60, RA65 ,SA63 Models. In the box: 8 bushings. It goes on the front of the vehicle.
The bar can only resist roll as well as its links are attached. A worn link bushing adds slack that the bar must take up before it works, so replacing it is a low-cost way to bring back sharp response. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. Other Whiteline parts we list for the Celica: Front Sway Bar Washer Kit, Front Strut Tower Brace Quick Release Kit, and Rear Lower Trailing Arm Bushing.
Features
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Easy to fit: Made with the installer in mind, so it goes in without special equipment.
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | W22121 |
| Part Name | Sway Bar Link Bushings |
| Vehicle | 1971-1985 Toyota Celica |
| Chassis Code | A20/A40/A60 |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Grade Type | Standard Replacement |
| Grease Fitting Included | No |
| Inside Diameter | 8 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 8 Bushings |
| Outside Diameter | 21 mm |
| Universal or Specific Fit | Universal |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Suits RA60, RA65 ,SA63 Models |