Product Details
This Whiteline Front Sway Bar Link Assembly fits the 2010-2011 Mercedes-Benz E300 E-Class (W212). It goes on the front of the vehicle. Whiteline part number: KLC180-335. You receive 2 links. Whiteline's note for this fit: Adjustable extra heavy duty.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required.
Features
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Hardware: Hardware supplied: locking nuts and washers.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Construction: High-strength alloy gives the strength needed without much weight.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
Specifications
| Part Number | KLC180-335 |
| Part Name | Sway Bar Link |
| Vehicle | 2010-2011 Mercedes-Benz E300 E-Class |
| Chassis Code | W212 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 330-355 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 330-355mm. Bolt Diameter 12mm. |


