Product Details
This Whiteline Front Sway Bar Link Assembly fits the 2009-2012 Nissan Versa 1.6, 1.6 Base. In the box: 2 links. Whiteline's note for this fit: Adjustable extra heavy duty. This part is for the front of the vehicle. The part number is KLC140-255. Trims named on the listing: 1.6 and 1.6 Base.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this front link is built to keep that connection firm. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. Working on the same car? We also list 14mm Adjustable Front Camber Bolts and Front Lower Inner Rear Control Arm Bushing Kit for the Versa.
Features
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Install guide: Written install instructions are included with the part.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
Specifications
| Part Number | KLC140-255 |
| Part Name | Sway Bar Link |
| Vehicle | 2009-2012 Nissan Versa 1.6, 1.6 Base |
| Chassis Code | N17 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 250-275 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 250-275mm. Bolt Diameter 10mm. |

