Product Details
This Whiteline Front Sway Bar Link Assembly fits the 2011-2017 Nissan Juke S, SL, SV (F15). In the box: 2 links. Whiteline's note for this fit: Adjustable extra heavy duty. The part number is KLC140-255. Position: front.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. Other Whiteline parts we list for the Juke: 14mm Adjustable Front Camber Bolts.
Features
- Construction: Alloy construction keeps the weight down while handling the loads.
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
- Hardware: Also in the box: locking nuts and washers.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Pre-greased: Joints arrive pre-greased and ready to install.
Specifications
| Part Number | KLC140-255 |
| Part Name | Sway Bar Link |
| Vehicle | 2011-2017 Nissan Juke S, SL, SV |
| Chassis Code | F15 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 250-275 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 250-275mm. Bolt Diameter 10mm. |

