Product Details
This Whiteline Front Sway Bar Link Assembly fits the 2010-2011 Hyundai Genesis Coupe 3.8 (BH). Position: front. Part number KLC180-335. You receive 2 links. Application note: Adjustable extra heavy duty.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Expect a moderate job of about 1 hour. A wheel alignment is not required. We also list 14mm Adjustable Front Camber Bolts, Front and Rear Sway Bar Kit, and Heavy Duty Blade Adjustable 26mm Rear Sway Bar for the Genesis Coupe.
Features
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Install guide: Instructions for fitting are packed in the box.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Construction: High-strength alloy gives the strength needed without much weight.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
Specifications
| Part Number | KLC180-335 |
| Part Name | Sway Bar Link |
| Vehicle | 2010-2011 Hyundai Genesis Coupe 3.8 |
| Chassis Code | BH |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 330-355 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 330-355mm. Bolt Diameter 12mm. |


