Product Details
This Whiteline Front Sway Bar Link Assembly fits the 2009-2012 Ford Escape Limited Hybrid (CD2). Position: front. Order it as part number KLC140-255. Application note: Adjustable extra heavy duty. You receive 2 links.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. We also list 12mm Adjustable Front Camber Bolts and Rear Sway Bar Link for the Escape.
Features
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Install guide: Written install instructions are included with the part.
- Hardware: The kit includes locking nuts and washers.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Construction: Alloy construction keeps the weight down while handling the loads.
Specifications
| Part Number | KLC140-255 |
| Part Name | Sway Bar Link |
| Vehicle | 2009-2012 Ford Escape Limited Hybrid |
| Chassis Code | CD2 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 250-275 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 250-275mm. Bolt Diameter 10mm. |

