Product Details
Here is the Whiteline Front Sway Bar Link Assembly for the 2008-2010 Mazda Tribute Hybrid. The chassis code on the listing is EP. The listing names the Hybrid trim. Whiteline part number: KLC140-255. Whiteline's note for this fit: Adjustable extra heavy duty. The kit contains 2 links. This part is for the front of the vehicle.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. Other Whiteline parts we list for the Tribute: 12mm Adjustable Front Camber Bolts.
Features
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
- Hardware: Supplied with locking nuts and washers.
- Install guide: An install guide comes in the box.
Specifications
| Part Number | KLC140-255 |
| Part Name | Sway Bar Link |
| Vehicle | 2008-2010 Mazda Tribute Hybrid |
| Chassis Code | EP |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 250-275 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 250-275mm. Bolt Diameter 10mm. |