Product Details
This Whiteline Front Sway Bar Link Assembly fits the 2005-2012 Ford Escape Hybrid (CD2). In the box: 2 links. Position: front. Order it as part number KLC140-255. Whiteline's note for this fit: Adjustable extra heavy duty.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. Other Whiteline parts we list for the Escape: 12mm Adjustable Front Camber Bolts and Rear Sway Bar Link.
Features
- Hardware: Hardware supplied: locking nuts and washers.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Install guide: An install guide comes in the box.
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
Specifications
| Part Number | KLC140-255 |
| Part Name | Sway Bar Link |
| Vehicle | 2005-2012 Ford Escape Hybrid |
| Chassis Code | CD2 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 250-275 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 250-275mm. Bolt Diameter 10mm. |

