Product Details
This Whiteline Front Sway Bar Link Assembly fits the 2005-2011 Mercury Mariner Base, Premier (EP). The kit contains 2 links. Application note: Adjustable extra heavy duty. This part is for the front of the vehicle. Part number KLC140-255.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. Other Whiteline parts we list for the Mariner: 12mm Adjustable Front Camber Bolts and Rear Sway Bar Link.
Features
- Install guide: Whiteline packs an install guide with it.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Construction: The body is made from high-grade alloy for strength without added weight.
- Hardware: Hardware supplied: locking nuts and washers.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
Specifications
| Part Number | KLC140-255 |
| Part Name | Sway Bar Link |
| Vehicle | 2005-2011 Mercury Mariner Base, Premier |
| Chassis Code | EP |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 250-275 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 250-275mm. Bolt Diameter 10mm. |

