Product Details
This Whiteline Front Sway Bar Link Assembly fits the 2003-2012 Ford Escape Limited (CD2). Position: front. Application note: Adjustable extra heavy duty. Included: 2 links. The part number is KLC140-255.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. To go with it on the Escape, see 12mm Adjustable Front Camber Bolts, Rear Sway Bar Link, and Front Sway Bar Mount Bushing.
Features
- Install guide: An install guide comes in the box.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Hardware: Hardware supplied: locking nuts and washers.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
Specifications
| Part Number | KLC140-255 |
| Part Name | Sway Bar Link |
| Vehicle | 2003-2012 Ford Escape Limited |
| Chassis Code | CD2 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 250-275 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 250-275mm. Bolt Diameter 10mm. |

