Product Details
This Whiteline Rear Sway Bar Link Assembly fits the 2002-2012 Land Rover Range Rover HSE (L322). Included: 2 links. Application note: Adjustable extra heavy duty. Position: rear. Order it as part number KLC180-335.
The rear sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Expect a moderate job of about 1 hour. No alignment is needed afterward. We also list Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and 16mm Adjustable Front Camber Bolts for the Range Rover.
Features
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
- Construction: High-strength alloy gives the strength needed without much weight.
- Install guide: An install guide comes in the box.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Hardware: Also in the box: locking nuts and washers.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
Specifications
| Part Number | KLC180-335 |
| Part Name | Sway Bar Link |
| Vehicle | 2002-2012 Land Rover Range Rover HSE |
| Chassis Code | L322 |
| Drivetrain | 4WD |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 330-355 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 330-355mm. Bolt Diameter 12mm. |


