Product Details
This Whiteline Front Sway Bar Link Assembly fits the 2000 Land Rover Range Rover County, HSK (P38A). Application note: Adjustable Extra Heavy Duty. The part number is KLC180-090. In the box: 2 links and 4 washers. Position: front.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment.
Features
- Construction: The body is made from high-grade alloy for strength without added weight.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Install guide: Step-by-step installation instructions come with it.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Hardware: Also in the box: locking nuts and washers.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
Specifications
| Part Number | KLC180-090 |
| Part Name | Sway Bar Link |
| Vehicle | 2000 Land Rover Range Rover County, HSK |
| Chassis Code | P38A |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 4 Washers |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | No |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt Diameter 12mm. |



