Product Details
This Whiteline Front Sway Bar Link Assembly fits the 1999 Land Rover Range Rover Callaway, S (P38A). Part number KLC180-090. Chassis code: P38A. This part is for the front of the vehicle. Whiteline's note for this fit: Adjustable Extra Heavy Duty. The kit contains 2 links and 4 washers.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward.
Features
- Hardware: Also in the box: locking nuts and washers.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Construction: The body is made from high-grade alloy for strength without added weight.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
Specifications
| Part Number | KLC180-090 |
| Part Name | Sway Bar Link |
| Vehicle | 1999 Land Rover Range Rover Callaway, S |
| Chassis Code | P38A |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 4 Washers |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | No |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt Diameter 12mm. |




