Product Details
This Whiteline Front Sway Bar Link Assembly fits the 1997 Land Rover Range Rover Kensington (P38A). It goes on the front of the vehicle. In the box: 2 links and 4 washers. Order it as part number KLC180-090. Application note: Adjustable Extra Heavy Duty.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this front link is built to keep that connection firm. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. No alignment is needed afterward.
Features
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Install guide: Step-by-step installation instructions come with it.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Construction: Alloy construction keeps the weight down while handling the loads.
Specifications
| Part Number | KLC180-090 |
| Part Name | Sway Bar Link |
| Vehicle | 1997 Land Rover Range Rover Kensington |
| Chassis Code | P38A |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 4 Washers |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | No |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt Diameter 12mm. |



