Product Details
This Whiteline Front Sway Bar Link Assembly fits the 1997-2000 Land Rover Range Rover Vitesse (P38A). Placement: front. Whiteline's note for this fit: Adjustable Extra Heavy Duty. Chassis code: P38A. Included: 2 links and 4 washers. Order it as part number KLC180-090.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment.
Features
- Install guide: Written install instructions are included with the part.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Hardware: Hardware supplied: locking nuts and washers.
Specifications
| Part Number | KLC180-090 |
| Part Name | Sway Bar Link |
| Vehicle | 1997-2000 Land Rover Range Rover Vitesse |
| Chassis Code | P38A |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 4 Washers |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | No |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt Diameter 12mm. |



