Product Details
This Whiteline Front Sway Bar Link Assembly fits the 1992-1995 Mazda MX-3 Base (EC). Whiteline's note for this fit: Adjustable extra heavy duty. Order it as part number KLC140-255. In the box: 2 links. It goes on the front of the vehicle.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. No alignment is needed afterward. We also list 12mm Adjustable Front Camber Bolts and Rear Suspension Trailing Arm Bushing for the MX-3.
Features
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Hardware: Hardware supplied: locking nuts and washers.
- Construction: High-strength alloy gives the strength needed without much weight.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
Specifications
| Part Number | KLC140-255 |
| Part Name | Sway Bar Link |
| Vehicle | 1992-1995 Mazda MX-3 Base |
| Chassis Code | EC |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 250-275 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 250-275mm. Bolt Diameter 10mm. |

