Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2015 Jeep Compass Altitude, High Altitude (MK). The kit contains 2 links. It goes on the front of the vehicle. Part number KLC163.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. To go with it on the Compass, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Control Arm Lower Inner Rear Bushing.
Features
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Construction: Made from strong, light alloy.
- Install guide: An install guide comes in the box.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2015 Jeep Compass Altitude, High Altitude |
| Chassis Code | MK |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |



