Product Details
This page covers the Whiteline Adjustable Front Sway Bar Link for the 2015-2017 Mitsubishi Outlander Sport GT. Trim named on the listing: Sport GT. It is listed for the GF chassis. Position: front. The part number is KLC163. Included: 2 links.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. Working on the same car? We also list 14mm Adjustable Front Camber Bolts for the Outlander.
Features
- Install guide: Instructions for fitting are packed in the box.
- Hardware: Also in the box: locking nuts and washers.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2015-2017 Mitsubishi Outlander Sport GT |
| Chassis Code | GF |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |