Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2011 Dodge Avenger Heat, Lux, Mainstreet (JS). Part number KLC163. Included: 2 links. It goes on the front of the vehicle.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. No alignment is needed afterward. We also list Adjustable Rear Sway Bar Link and Front Control Arm Lower Inner Rear Bushing for the Avenger.
Features
- Construction: Made from strong, light alloy.
- Install guide: Whiteline packs an install guide with it.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Hardware: Hardware supplied: locking nuts and washers.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2011 Dodge Avenger Heat, Lux, Mainstreet |
| Drivetrain | FWD |
| Chassis Code | JS |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |



