Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2011-2017 Jeep Compass Latitude (MK). The kit contains 2 links. Position: front. Part number KLC163.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this front link is built to keep that connection firm. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. Other Whiteline parts we list for the Compass: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Control Arm Lower Inner Rear Bushing.
Features
- Hardware: Hardware supplied: locking nuts and washers.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Install guide: Whiteline packs an install guide with it.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2011-2017 Jeep Compass Latitude |
| Chassis Code | MK |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |



