Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2011-2014 Chrysler 200 Touring (JS). It goes on the front of the vehicle. Whiteline part number: KLC163. The kit contains 2 links.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. To go with it on the Chrysler 200, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Control Arm Lower Inner Rear Bushing.
Features
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Install guide: Written install instructions are included with the part.
- Construction: The body is made from high-grade alloy for strength without added weight.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2011-2014 Chrysler 200 Touring |
| Chassis Code | JS |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |



