Product Details
These Whiteline Adjustable Front Sway Bar Drop Links fit the 2011-2013 Subaru Forester X Touring, XT Touring (SH). It goes on the front of the vehicle. Application note: Adjustable Extra Heavy Duty. The part number is KLC139. The kit contains 2 links. Chassis code: SH.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. To go with it on the Forester, see Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Material: Made from steel.
- Hardware: Supplied with locking nuts and washers.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Responsiveness: Sharpens the car's reaction in lane changes and through corners.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Warranty: Whiteline backs it with a warranty listed at 3 years and 60,000 miles.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 2011-2013 Subaru Forester X Touring, XT Touring |
| Chassis Code | SH |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |




