Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2010 Dodge Journey Base (JC49). The part number is KLC163. It goes on the front of the vehicle. In the box: 2 links.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. A wheel alignment is not required. Other Whiteline parts we list for the Journey: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Control Arm Lower Inner Rear Bushing.
Features
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Hardware: Also in the box: locking nuts and washers.
- Construction: The body is made from high-grade alloy for strength without added weight.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Anodized alloy: The alloy carries an anodized finish for durability.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2010 Dodge Journey Base |
| Drivetrain | FWD/AWD |
| Chassis Code | JC49 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |




