Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2010-2011 Dodge Avenger Express (JS). It goes on the front of the vehicle. Part number KLC163. You receive 2 links.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. We also list Adjustable Rear Sway Bar Link and Front Control Arm Lower Inner Rear Bushing for the Avenger.
Features
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Construction: Made from strong, light alloy.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Install guide: Whiteline packs an install guide with it.
- Hardware: Supplied with locking nuts and washers.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2010-2011 Dodge Avenger Express |
| Drivetrain | FWD |
| Chassis Code | JS |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |




