Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2008-2017 Mitsubishi Outlander SE (GF). It goes on the front of the vehicle. Whiteline part number: KLC163. You receive 2 links.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. To go with it on the Outlander, see 14mm Adjustable Front Camber Bolts, Front Control Arm Lower Inner Rear Bushing, and Heavy Duty Blade Adjustable 24mm Rear Sway Bar.
Features
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Hardware: Hardware supplied: locking nuts and washers.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Construction: The body is made from high-grade alloy for strength without added weight.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2008-2017 Mitsubishi Outlander SE |
| Drivetrain | FWD/AWD |
| Chassis Code | GF |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |



