Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2008-2014 Dodge Avenger SE, SXT (JS). Placement: front. Order it as part number KLC163. Chassis code: JS. The kit contains 2 links.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. To go with it on the Avenger, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Control Arm Lower Inner Rear Bushing.
Features
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Construction: High-strength alloy gives the strength needed without much weight.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Hardware: The kit includes locking nuts and washers.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Install guide: Step-by-step installation instructions come with it.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2008-2014 Dodge Avenger SE, SXT |
| Chassis Code | JS |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |



