Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2008-2010 Saturn Vue XE, XR (Theta). Placement: front. Chassis code: Theta. Part number KLC163. The kit contains 2 links.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. We also list 14mm Adjustable Front Camber Bolts and Rear Sway Bar Link for the Saturn Vue.
Features
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Hardware: The kit includes locking nuts and washers.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Install guide: Instructions for fitting are packed in the box.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2008-2010 Saturn Vue XE, XR |
| Drivetrain | FWD/AWD |
| Chassis Code | Theta |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |




