Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2007-2011 Mitsubishi Outlander XLS (CU). Order it as part number KLC163. This part is for the front of the vehicle. You receive 2 links.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. We also list 14mm Adjustable Front Camber Bolts, Front Control Arm Lower Inner Rear Bushing, and Heavy Duty Blade Adjustable 24mm Rear Sway Bar for the Outlander.
Features
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Install guide: Written install instructions are included with the part.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Hardware: The kit includes locking nuts and washers.
- Construction: Made from strong, light alloy.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2007-2011 Mitsubishi Outlander XLS |
| Drivetrain | FWD/AWD |
| Chassis Code | CU |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |




