Product Details
These Whiteline Adjustable Front Sway Bar Drop Links fit the 2005-2013 Subaru Forester XT Premium (SG/SH/SJ). You receive 2 links. This part is for the front of the vehicle. Application note: Adjustable Extra Heavy Duty. Whiteline part number: KLC139. Chassis code: SG/SH/SJ.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. We also list Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and 14mm Adjustable Front Camber Bolts for the Forester.
Features
- Warranty: Covered by a warranty that Whiteline lists at 3 years and 60,000 miles.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Hardware: Supplied with locking nuts and washers.
- Responsiveness: Sharpens the car's reaction in lane changes and through corners.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Material: The part is made of steel.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 2005-2013 Subaru Forester XT Premium |
| Chassis Code | SG/SH/SJ |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |



