Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2002-2011 Toyota Camry SE (XV30/XV40). Position: front. The part number is KLC163. You receive 2 links.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this front link is built to keep that connection firm. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. To go with it on the Camry, see Heavy Duty 20mm Rear Sway Bar, Front Steering Rack And Pinion Mount Bushing, and Front Control Arm Lower Inner Front Bushing.
Features
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
- Construction: Alloy construction keeps the weight down while handling the loads.
- Hardware: Supplied with locking nuts and washers.
- Install guide: Written install instructions are included with the part.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2002-2011 Toyota Camry SE |
| Chassis Code | XV30/XV40 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |




