Product Details
This Whiteline Adjustable Front Sway Bar Link Adjustable fits the 2001-2009 Toyota Prius Base (NHW11/NHW20). The part number is KLC169. It goes on the front of the vehicle. In the box: 2 links. Application note: Adjustable Extra Heavy Duty.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. We also list Front Control Arm Lower Inner Front Bushing, 15mm Adjustable Front Camber Bolts, and Heavy Duty 22mm Rear Sway Bar for the Prius.
Features
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Hardware: The kit includes locking nuts and washers.
- Install guide: An install guide comes in the box.
Specifications
| Part Number | KLC169 |
| Part Name | Sway Bar Link |
| Vehicle | 2001-2009 Toyota Prius Base |
| Chassis Code | NHW11/NHW20 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 270-295mm. Bolt Diameter 10mm. |



