Whiteline Adjustable Front Sway Bar Link for 2017-2020 Toyota 86 Base (ZN6)

Product Details

This page covers the Whiteline Adjustable Front Sway Bar Link for the 2017-2020 Toyota 86 Base (ZN6). It goes on the front of the vehicle. Trim named on the listing: Base. Application note: Suits vehicles with aftermarket coilovers. Adjustable Extra Heavy Duty. Order it as part number KLC219. You receive 2 links and 8 washers.

The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.

Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. To go with it on the Toyota 86, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Sway Bar Vehicle Link Kit.

Features

• Ball joints: Steel ball joint ends are built for heavy loads and free movement.
• Corrosion protection: The hardware is plated to stand up to road conditions.
• Pre-greased: Comes pre-greased, so it can go straight on the car.
• Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
• Hardware: The kit includes locking nuts and washers.
• Anodized alloy: The alloy is anodized, adding a durable protective layer.

Specifications