Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2016 Mazda MX-5 Miata Launch Edition (ND). Whiteline's note for this fit: Adjustable Extra Heavy Duty. Placement: front. The kit contains 2 links. Whiteline part number: KLC205.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. We also list Adjustable Sway Bar Vehicle Link Kit, Front and Rear Sway Bar Kit, and Rear Sway Bar Link for the MX-5 Miata.
Features
- Install guide: Step-by-step installation instructions come with it.
- Material: Steel construction.
- Compliance voids: Voids molded into the bushing allow suspension articulation and soften sharp road inputs.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
Specifications
| Part Number | KLC205 |
| Part Name | Sway Bar Link |
| Vehicle | 2016 Mazda MX-5 Miata Launch Edition |
| Drivetrain | RWD |
| Chassis Code | ND |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 84-94 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 84-94mm. Bolt Diameter 10mm. |


