Product Details
This page covers the Whiteline Front Sway Bar Link for the 2016 Land Rover Range Rover Evoque SE Dynamic (L405). Trim named on the listing: SE Dynamic. Whiteline's note for this fit: Adjustable Extra Heavy Duty. Placement: front. Whiteline part number: KLC105. You receive 2 links.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. A wheel alignment is not required.
Features
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Construction: The body is made from high-grade alloy for strength without added weight.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Hardware: Also in the box: locking nuts and washers.
Specifications
| Part Number | KLC105 |
| Part Name | Sway Bar Link |
| Vehicle | 2016 Land Rover Range Rover Evoque SE Dynamic |
| Chassis Code | L405 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 310-335 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 310-335mm. |