Product Details
For the 2015-2023 Toyota 4Runner TRD Pro (N210), Whiteline makes the Front Sway Bar Link. Position: front. The listing names the TRD Pro trim. You receive 2 links and 6 washers. Whiteline's note for this fit: Adjustable Extra Heavy Duty. The part number is KLC220.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. To go with it on the 4Runner, see Front Steering Rack And Pinion Mount Bushing, Front Upper Control Arm Bushing Kit, and Front Sway Bar Bushing Kit.
Features
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Construction: Made from strong, light alloy.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Install guide: Step-by-step installation instructions come with it.
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
Specifications
| Part Number | KLC220 |
| Part Name | Sway Bar Link |
| Vehicle | 2015-2023 Toyota 4Runner TRD Pro |
| Chassis Code | N210 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 6 Washers |
| Length | 125-150 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 125-150mm. Bolt Diameter 12mm. |

