Product Details
The Whiteline Adjustable Front Sway Bar Link fits the 2013 Volvo C30 T5 R-Design. The listing names the T5 R-Design trim. The kit contains 2 links and 8 washers. This part is for the front of the vehicle. Whiteline's note for this fit: Adjustable extra heavy duty. The part number is KLC151. Chassis code: P1.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. A wheel alignment is not required. To go with it on the Volvo C30, see Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Front Control Arm Lower Inner Front Bushing.
Features
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Install guide: Step-by-step installation instructions come with it.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Hardware: Supplied with locking nuts and washers.
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
Specifications
| Part Number | KLC151 |
| Part Name | Sway Bar Link |
| Vehicle | 2013 Volvo C30 T5 R-Design |
| Chassis Code | P1 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 310-335 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm. |