Product Details
Looking for a front sway bar link for your 2013 BMW 135is 1 Series (E82)? The Whiteline Adjustable Front Sway Bar Link is made for it. Application note: Adjustable extra heavy duty. The kit contains 2 links and 8 washers. Part number KLC154. It goes on the front of the vehicle.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. No alignment is needed afterward. Other Whiteline parts we list for the 135is 1 Series: Heavy Duty 20mm Rear Sway Bar, Rear Sway Bar Link, and Rear Lower Trailing Arm Bushing.
Features
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | KLC154 |
| Part Name | Sway Bar Link |
| Vehicle | 2013 BMW 135is 1 Series |
| Chassis Code | E82 |
| Drivetrain | RWD |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 290-315 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 290-315mm. Bolt diameter 10mm. |