Product Details
Made to fit the 2011-2013 BMW 335is 3 Series (E92/E93), the Adjustable Front Sway Bar Link from Whiteline. Placement: front. Whiteline's note for this fit: Adjustable extra heavy duty. You receive 2 links and 8 washers. Whiteline part number: KLC154.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. To go with it on the 335is 3 Series, see Adjustable Rear Sway Bar Link, Rear Subframe Mount Bushing, and Heavy Duty 20mm Rear Sway Bar.
Features
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
- Install guide: Instructions for fitting are packed in the box.
- Hardware: Also in the box: locking nuts and washers.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
Specifications
| Part Number | KLC154 |
| Part Name | Sway Bar Link |
| Vehicle | 2011-2013 BMW 335is 3 Series |
| Chassis Code | E92/E93 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 290-315 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 290-315mm. Bolt diameter 10mm. |



