Product Details
This Whiteline Front Sway Bar Link fits the 2009-2013 Chevrolet Corvette ZR1 (C6). Whiteline's note for this fit: Adjustable Extra Heavy Duty. The kit contains 2 links. This part is for the front of the vehicle. The part number is KLC110.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. We also list Rear Sway Bar Link for the Corvette.
Features
- Install guide: An install guide comes in the box.
- Hardware: The kit includes locking nuts and washers.
- Construction: The body is made from high-grade alloy for strength without added weight.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
Specifications
| Part Number | KLC110 |
| Part Name | Sway Bar Link |
| Vehicle | 2009-2013 Chevrolet Corvette ZR1 |
| Chassis Code | C6 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt diameter 12mm. |


